Jeep Wrangler: MULTIMEDIA

After Driving Off-Road

Off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage...

UCONNECT SYSTEMS

For detailed information about your Uconnect 4/4C/4C NAV With 8.4-inch Display system, refer to your Uconnect Owner’s Manual Supplement. NOTE: Uconnect screen images are for illustration purposes only and may not reflect exact software for your vehicle...

Other information:

Jeep Wrangler 2018-2024 Owners Manual: Hard Top Front Panel(s) Installation


Open the header latch inside the vehicle, and the three L-shaped locks on each panel. Set the right side panel on the windshield frame with the locating pin in the front receiver mounting hole followed by the left side panel, making sure there is no overhang...

Jeep Wrangler 2018-2024 Owners Manual: To Install A LATCH-Compatible Child Restraint


If the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below. Check what type of seat belt each seating position has. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages...

Categories

Automatic Headlights — If Equipped, Lights-On Reminder

Automatic Headlights

This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.

read more

 
Copyright © 2024 www.jewrangler.com