Jeep Wrangler 2018-2026 Owners Manual / GETTING TO KNOW YOUR VEHICLE / CLIMATE CONTROLS / Manual Climate Control Descriptions And Functions
Jeep Wrangler: CLIMATE CONTROLS / Manual Climate Control Descriptions And Functions
Uconnect 3 With 5-inch Display Manual Climate Controls
- MAX A/C Setting — If Equipped
- A/C Button
- Recirculation Button
- Front Defrost Setting
- Rear Defrost Button
- Temperature Control
- Blower Control
- Mode Control
- Panel Mode
- Bi-Level Mode
- Floor Mode
- Mix Mode
- Climate Control OFF
MAX A/C Setting — If Equipped
Set the temperature control knob
to
the MAX A/C setting to change the
current setting to the coldest output
of air. Moving the temperature control
knob away from the MAX A/C setting causes the
MAX A/C operation to exit...
Other information:
Jeep Wrangler 2018-2026 Owners Manual: How To Disengage The Automatic Locking Mode
Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. WARNING! The seat belt assembly must be replaced if the switchable Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual...
Jeep Wrangler 2018-2026 Owners Manual: Turn Signal Indicator Lights
When the left or right turn signal is activated, the turn signal indicator will flash independently and the corresponding exterior turn signal lamps will flash. Turn signals can be activated when the multifunction lever is moved down (left) or up (right)...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- 2.0L Engine and 3.6L Engine
- SiriusXM® Satellite Radio Mode — If Equipped
- Engine Coolant Level — 2.0L
- New on site
- Most important about car
Automatic Headlights — If Equipped, Lights-On Reminder
Automatic Headlights
This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.
Copyright © 2026 www.jewrangler.com