Jeep Wrangler: Manual Climate Control Descriptions And Functions / Mix Mode
Air is directed through the
floor,
defrost, and side window demister
outlets. This setting works best in cold
or snowy conditions that require extra
heat to the windshield. This setting is good for
maintaining comfort while reducing moisture on
the windshield.
Other information:
Carefully place the front door rail in the
rubber seal at the top of the windshield,
and line up the holes for the Torx head
screws (two for each door).
Swing the frame bracket around the side of
the rail, and insert the screws from
underneath...
Remove the rear window and quarter panel
windows.
From the Sunrider® position,
remove straps if previously secured and
move to the rear of the vehicle.
Locate the Sunrider® latch beneath the #6
Bow of the soft top on the left side.
Step Three
Pull the latch to release the top, and allow
the soft top to slide rearward freely in the
guide tracks to the stowed position...