Jeep Wrangler 2018-2026 Owners Manual / GETTING TO KNOW YOUR VEHICLE / WRANGLER TOPS / Raising The Soft Top / Install The Rear Window

Jeep Wrangler: Raising The Soft Top / Install The Rear Window

Guide the rear window into the retainer from left to right while keeping the window level.

Step One
Insert the swing gate bar into the retainers at the bottom of the window from left to the right.

Step Two
Rotate the swing gate bar into the left and right side retainers.

Step Three
Line up the rear window to the right side quarter window first, and engage the plastic retainers.
Repeat with the left side quarter window.

Step Five
Engage the rear window retainers in the lower right and left corners.

Step Six

NOTE:

For information on removing your soft top, refer to the next section.

Installing The Soft Top Windows

Install The Right And Left Quarter Windows From the rear of the vehicle, guide the top of the window into the retainer and slide forward while keeping the window level...

Removing The Soft Top

Use this QR code to access your digital experience. Fully lower the soft topCAUTION! Failure to follow the next steps could result in damage to the Soft Top or vehicle...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: How To Disengage The Automatic Locking Mode

Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. WARNING! The seat belt assembly must be replaced if the switchable Automatic Locking Retractor (ALR) feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual...

Jeep Wrangler 2018-2026 Owners Manual: Auto-Down Feature

The driver door power and the passenger door power window switches have an Auto-Down feature. Push the window switch down to the second detent and release, and the window will go down automatically. To stop the window from going all the way down during the Auto-Down operation, pull up on the switch briefly...

Automatic Headlights — If Equipped, Lights-On Reminder

Automatic Headlights

This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.