Jeep Wrangler: Red Warning Lights / Hood Open Warning Light

Jeep Wrangler. Hood Open Warning Light This indicator will illuminate when the hood is ajar/open and not fully closed.

NOTE:

If the vehicle is moving, there will also be a single chime.

    Engine Coolant Temperature Warning Light

    This warning light warns of an overheated engine condition. If the engine coolant temperature is too high, this indicator will illuminate and a single chime will sound...

    Oil Pressure Warning Light

    This warning light will illuminate, and a chime will sound, to indicate low engine oil pressure. If the light and chime turn on while driving, safely stop the vehicle and turn off the engine as soon as possible...

    Other information:

    Jeep Wrangler 2018-2026 Owners Manual: Common Towing Definitions


    The following trailer towing related definitions will assist you in understanding the following information: The GVWR is the total allowable weight of your vehicle. This includes driver, passengers, cargo and tongue weight. The total load must be limited so that you do not exceed the GVWR...

    Jeep Wrangler 2018-2026 Owners Manual: Possible Reasons The Engine Does Not Autostop


    Prior to engine shut down, the system will check many safety and comfort conditions to see if they are fulfilled. Situations when the engine will not stop include (but not limited to): Driver’s seat belt is not buckled. Outside temperature is less than 10°F (–12°C) or greater than 109°F (43°C)...

    Categories

    Bi-Level Mode

    Jeep Wrangler. Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

    NOTE:

    Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

    read more

     
    Copyright © 2026 www.jewrangler.com