Jeep Wrangler: Automatic Climate Control Descriptions And Functions / Bi-Level Mode
Air comes from the instrument
panel
outlets and floor outlets. A slight
amount of air is directed through the
defrost and side window demister
outlets.
NOTE:
Bi-Level mode is designed under comfort conditions
to provide cooler air out of the panel
outlets and warmer air from the floor outlets.
Air comes from the outlets in
the
instrument panel. Each of these
outlets can be individually adjusted to
direct the flow of air. The air vanes of
the center outlets and outboard outlets can be
moved up and down or side to side to regulate
airflow direction...
Other information:
The BSM system uses two radar sensors,
located inside the taillights, to detect highway
licensable vehicles (automobiles, trucks,
motorcycles, etc.) that enter the blind spot
zones from the rear/front/side of the vehicle.
Rear Detection Zones
When the vehicle is started, the BSM Warning
Light will momentarily illuminate in both outside
rearview mirrors to let the driver know that the
system is operational...
Fluid Level Check
The fluid level should be to the bottom edge of
the fill hole when the vehicle is in a level
position.
Transfer Case
Fill hole
Drain hole
Drain And Refill
For the proper maintenance intervals.
Selection Of Lubricant
Use only the manufacturer recommended fluid...