Jeep Wrangler: WARNING LIGHTS AND MESSAGES / White Indicator Lights
When the left or right turn
signal is
activated, the turn signal indicator will
flash independently and the
corresponding exterior turn signal
lamps will flash...
Other information:
The transmission gear range (PRNDM) is
displayed both beside the gear selector and in
the instrument cluster. To select a gear range,
push the lock button on the gear selector and
move the selector rearward or forward. To shift
the transmission out of PARK, the engine must
be running and the brake pedal must be pressed...
When the gear selector is in NEUTRAL, the
engine will start when the clutch pedal is
pressed (does not require complete/full pedal
press). The vehicle will go into STOP/START
SYSTEM NOT READY mode until the vehicle
speed is greater than 5 mph (8 km/h)...