Jeep Wrangler 2018-2026 Owners Manual / GETTING TO KNOW YOUR INSTRUMENT PANEL / WARNING LIGHTS AND MESSAGES / White Indicator Lights / Adaptive Cruise Control (ACC) Ready Light — If Equipped
Jeep Wrangler: White Indicator Lights / Adaptive Cruise Control (ACC) Ready Light — If Equipped
This light will turn on when the
vehicle
equipped with ACC has been turned
on, but not set.
Other information:
Jeep Wrangler 2018-2026 Owners Manual: Engine Check/Malfunction Indicator Warning Light (MIL)
The MIL is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. This warning light will illuminate when the ignition is in the ON/RUN position before engine start. If the bulb does not come on when turning the ignition switch from OFF to ON/RUN, have the condition checked promptly...
Jeep Wrangler 2018-2026 Owners Manual: AUTOMATIC TRANSMISSION — IF EQUIPPED
You must press and hold the brake pedal while shifting out of PARK. CAUTION! Shift into or out of PARK or REVERSE only after the vehicle has come to a complete stop. Do not shift between PARK, REVERSE, NEUTRAL, or DRIVE when the engine is above idle speed...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Engine Coolant Level — 2.0L
- UCONNECT SETTINGS
- WARNING LIGHTS AND MESSAGES
- New on site
- Most important about car
Manual Front Seat Forward/Rearward Adjustment
The seat can be adjusted forward or rearward by using a bar located by the front of the seat cushion, near the floor. While sitting in the seat, lift up on the bar located under the seat cushion and move the seat forward or rearward. Release the bar once you have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched.
Adjustment Bar Location
Copyright © 2026 www.jewrangler.com