Jeep Wrangler: Automatic Climate Control Descriptions And Functions / SYNC Button

Jeep Wrangler. SYNC Button Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator illuminates when SYNC is on. SYNC synchronizes the passenger temperature setting with the driver temperature setting. Changing the passenger’s temperature setting while in SYNC will automatically exit this feature.

NOTE:

The SYNC button is only available on the touchscreen.

    Driver And Passenger Temperature Up And Down Buttons

    Provides the driver and passenger with independent temperature control. Push the red button on the faceplate or touchscreen or press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature settings...

    Blower Control

    Blower Control regulates the amount of air forced through the Climate Control system. Adjusting the blower will cause automatic mode to switch to manual operation...

    Other information:

    Jeep Wrangler 2018-2024 Owners Manual: To Resume


    If there is a set speed in the memory, push the RES button and then remove your foot from the accelerator pedal. The instrument cluster display will show the last set speed. Resume can be used at any speed above 20 mph (32 km/h) when only Fixed Speed Cruise Control is being used...

    Jeep Wrangler 2018-2024 Owners Manual: Using The Retention Straps


    There are two retention straps located on the back of the rear seat and two corresponding wire loops located on the back of each B-pillar. Open the hook-and-loop fastener on the strap and thread through the wire loop. Fold the hook-and-loop fastener over to keep the seat in the folded position...

    Categories

    REMOTE START — IF EQUIPPED (DIESEL)

    read more

     
    Copyright © 2024 www.jewrangler.com