Jeep Wrangler: Automatic Climate Control Descriptions And Functions / Driver And Passenger Temperature Up And Down Buttons
Provides the driver and passenger with
independent temperature control.
Push the red button on the
faceplate
or touchscreen or press and slide the
temperature bar towards the red
arrow button on the touchscreen for
warmer temperature settings.
Push the blue button on the
faceplate
or touchscreen or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
NOTE:
The numbers within the temperature display will
only appear if your vehicle is equipped with an
Automatic Climate Control system.
Press and release the Rear
Defrost
button on the touchscreen, or push
and release the button on the
faceplate, to turn on the rear window
defroster and the heated outside mirrors (if
equipped)...
Press the SYNC button on the
touchscreen to toggle the SYNC
feature on/off. The SYNC indicator
illuminates when SYNC is on. SYNC
synchronizes the passenger temperature
setting with the driver temperature setting...
Other information:
If your vehicle is equipped with LED fog lamps
they are replaced as an assembly.
Rear Tail, Stop, Turn Signal, And Backup Lamp
See below steps to replace:
Remove interior trim panel cap to access
single retaining screw for tail lamp
assembly.
Trim Cap
Remove retaining screw and disconnect
electrical connector, then remove tail lamp
assembly from the vehicle...
Voice Command
For the best performance:
Always wait for the beep before speaking
Speak normally, without pausing, just as you
would speak to a person sitting a few feet/
meters away from you
Ensure that no one other than you is
speaking during a voice command period
Low-To-Medium Blower Setting
Low-To-Medium Vehicle Speed
Low Road Noise
Smooth Road Surface
Fully Closed Windows
Dry Weather Conditions
WARNING!
ALWAYS drive safely with your hands on the
wheel...