Jeep Wrangler: Yellow Indicator Lights / Sway Bar Indicator Light — If Equipped
This indicator light will
illuminate
when the front sway bar is
disconnected.
This indicator light will
illuminate for
approximately two seconds when the
ignition is turned to the ON/RUN
position. Its duration may be longer
based on colder operating conditions...
Other information:
The Tire Pressure Monitoring System (TPMS)
will warn the driver of a low tire pressure based
on the vehicle recommended cold placard
pressure.
NOTE:
The alert warning on the cluster will stay on until
the tire is inflated to the placard pressure.
The tire pressure will vary with temperature by
approximately 1 psi (7 kPa) for every 12°F
(6...
SSC is intended for off-road
driving in
4WD Low only. SSC maintains vehicle
speed by actively controlling engine
torque and brakes.
SSC has three states:
Off (feature is not enabled and will not
activate)
Enabled (feature is enabled and ready but
activation conditions are not met, or driver
is actively overriding with brake or throttle
application)
Active (feature is enabled and actively
controlling vehicle speed)
Enabling SSC
SSC is enabled by pushing the SSC switch, but
the following conditions must also be met to
enable SSC:
The driveline is in 4WD Low...