Jeep Wrangler 2018-2026 Owners Manual / GETTING TO KNOW YOUR INSTRUMENT PANEL / WARNING LIGHTS AND MESSAGES / Yellow Indicator Lights / Service Adaptive Cruise Control Warning Light — If Equipped
Jeep Wrangler: Yellow Indicator Lights / Service Adaptive Cruise Control Warning Light — If Equipped
This light will turn on when a
ACC is
not operating and needs service.
Other information:
Jeep Wrangler 2018-2026 Owners Manual: Bumper End Cap Removal
The end caps on your vehicle’s front fascia/ bumper can be removed by following the steps below: NOTE: Bumper end caps are removable on steel fascia/bumper only. Loosen the two bolts that retain the GAWR bracket (Bolts #1 and #2) to the end cap using a T45 torx bit screw driver...
Jeep Wrangler 2018-2026 Owners Manual: Manual Transmission — If Equipped
Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 of an inch (4.76 mm) below the bottom of the hole. Add fluid, if necessary, to maintain the proper level...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Auxiliary Switches — If Equipped
- How To Use Remote Start
- 2.0L Engine and 3.6L Engine
- New on site
- Most important about car
Bi-Level Mode
Air comes from the instrument
panel
outlets and floor outlets. A slight
amount of air is directed through the
defrost and side window demister
outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.
Copyright © 2026 www.jewrangler.com