Jeep Wrangler: Tires — General Information / Replacement Tires

The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures. FCA strongly recommends that you use tires equivalent to the originals in size, quality and performance when replacement is needed. Refer to the paragraph on “Tread Wear Indicators” in this section. Refer to the Tire and Loading Information placard or the Vehicle Certification Label for the size designation of your tire. The Load Index and Speed Symbol for your tire will be found on the original equipment tire sidewall.

For more information relating to the Load Index and Speed Symbol of a tire.

It is recommended to replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match those of the original wheels.

It is recommended you contact an authorized tire dealer or original equipment dealer with any questions you may have on tire specifications or capability. Failure to use equivalent replacement tires may adversely affect the safety, handling, and ride of your vehicle.

WARNING!

  • Do not use a tire, wheel size, load rating, or speed rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering and suspension components. You could lose control and have a collision resulting in serious injury or death. Use only the tire and wheel sizes with load ratings approved for your vehicle.
  • Never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision.
  • Failure to equip your vehicle with tires having adequate speed capability can result in sudden tire failure and loss of vehicle control.

CAUTION!

Replacing original tires with tires of a different size may result in false speedometer and odometer readings.

    Life Of Tire

    The service life of a tire is dependent upon varying factors including, but not limited to: Driving style. Tire pressure - Improper cold tire inflation pressures can cause uneven wear patterns to develop across the tire tread...

    Tire Types

    ..

    Other information:

    Jeep Wrangler 2018-2024 Owners Manual: Five-Position Transfer Case — If Equipped


    Four-Wheel Drive Gear Selector The transfer case provides five mode positions: 2H (2WD High) — Two-Wheel Drive High Range 4H AUTO (4WD High AUTO) — Four-Wheel Drive Auto High Range 4H PT (4WD High PT) — Four-Wheel Drive Part Time High Range N (Neutral) 4L (4WD Low) — Four-Wheel Drive Low Range For additional information on the appropriate use of each transfer case mode position, see the information below: 2WD High Two-Wheel Drive High Range — This range is for normal street and highway driving on dry, hard surfaced roads...

    Jeep Wrangler 2018-2024 Owners Manual: Appearance Care For Fabric Top Models


    To maintain the appearance of your vehicle's interior trim and top, follow these precautions: Do not run a fabric top through an automatic car wash. Window scratches and wax build-up may result. Avoid leaving your vehicle unattended with the top down, as exposure to sun or rain may damage interior trim...

    Categories

    Bi-Level Mode

    Jeep Wrangler. Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

    NOTE:

    Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

    read more

     
    Copyright © 2024 www.jewrangler.com