Jeep Wrangler: STARTING AND OPERATING / REFUELING THE VEHICLE — GASOLINE ENGINE (IF EQUIPPED)
Press and hold the “Clean Camera” soft button
located on the TrailCam view to wash the
TrailCam. Washer fluid will stop when the
button is released...
The fuel filler cap is located on the driver's side
of the vehicle. If the fuel filler cap is lost or
damaged, be sure the replacement cap is the
correct one for this vehicle...
Other information:
ERM anticipates the potential for wheel lift by
monitoring the driver’s steering wheel input and
the speed of the vehicle. When ERM determines
that the rate of change of the steering wheel
angle and vehicle’s speed are sufficient to
potentially cause wheel lift, it then applies the
appropriate brake and may also reduce engine
power to lessen the chance that wheel lift will
occur...
The transmission gear range (PRNDM) is
displayed both beside the gear selector and in
the instrument cluster. To select a gear range,
push the lock button on the gear selector and
move the selector rearward or forward. To shift
the transmission out of PARK, the engine must
be running and the brake pedal must be pressed...