Jeep Wrangler: ASSIST AND SOS SYSTEM — IF EQUIPPED / ASSIST Call

The ASSIST Button is used to automatically connect you to any one of the following support centers:

  • Roadside Assistance – If you get a flat tire, or need a tow, just push the ASSIST button and you’ll be connected to someone who can help. Roadside Assistance will know what vehicle you’re driving and its location. Additional fees may apply for roadside assistance.
  • SiriusXM Guardian™ Customer Care – In-vehicle support for SiriusXM Guardian™.
  • Vehicle Customer Care – Total support for all other vehicle issues.
  • Uconnect Customer Care - Total support for Radio, Phone and NAV issues.

    ASSIST AND SOS SYSTEM — IF EQUIPPED

    Assist And SOS Buttons Assist Button SOS Button If equipped, the overhead console contains an ASSIST and an SOS button. WARNING! ALWAYS obey traffic laws and pay attention to the road...

    SOS Call

    Push the SOS Call button on the overhead console.NOTE: In case the SOS Call button is pushed in error, there will be a 10 second delay before the SOS Call system initiates a call to an SOS operator...

    Other information:

    Jeep Wrangler 2018-2024 Owners Manual: Checking Oil Level


    To ensure proper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check the engine oil level is about five minutes after a fully warmed up engine is shut off...

    Jeep Wrangler 2018-2024 Owners Manual: Cargo Carpet (Four Door Models) With Gap Hider


     Remove the grommets under the rear seat (one left and one right). Pull the carpet out to the front and open the carpet split around the seat belt attachment and under the center seat bracket. Under Rear Seat Carpet Split Grommets Rear Carpet When reinstalling carpet please perform these steps in reverse order making sure that the carpet is tucked under the scuffs, B-pillar, console, and refasten grommets...

    Categories

    Bi-Level Mode

    Jeep Wrangler. Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

    NOTE:

    Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

    read more

     
    Copyright © 2024 www.jewrangler.com