Jeep Wrangler: Using SiriusXM Guardian™ / Remote Horn & Lights
Description
It is easy to locate a vehicle in a dark, crowded or noisy parking area by activating the horn and lights. It may also help if you need to draw attention to your vehicle for any reason.
If you want, you can set up push notifications every time a command is sent to turn on the horn and lights.
Working Vehicle Conditions
- The vehicle must in PARK or at a standstill.
- The vehicle must be in an open area with cell tower reception.
- Your mobile device must have a cellular or Wi-Fi connection.
NOTE:
The Remote Horn & Lights feature is designed to be loud and get noticed. Please keep in mind the surroundings when using this feature. You are responsible for compliance with local laws, rules and ordinances in the location of your vehicle when using Remote Horn & Lights.
Remote Vehicle Start
Description
The Remote Vehicle Start feature provides you
with the ability to start the engine on your
vehicle without the keys and from virtually any
distance...
Roadside Assistance Call
Description
Vehicles equipped with the SiriusXM Guardian™
system feature will contain an ASSIST button in
the vehicle. Once your SiriusXM Guardian™
services have been activated, the ASSIST button can connect you directly to
customer
care call centers...
Other information:
Jeep Wrangler 2018-2025 Owners Manual: Cooling System Tips — Automatic Transmission
To reduce the potential for engine and transmission overheating in high ambient temperature conditions, take the following actions: City Driving — When stopped, shift the transmission into NEUTRAL (N) and increase engine idle speed. Highway Driving — Reduce your speed...
Jeep Wrangler 2018-2025 Owners Manual: To Manually Turn Off The Stop/Start System
Push the Stop/Start OFF switch (located on the switch bank). The light on the switch will illuminate. Stop/Start OFF Switch The STOP/START OFF message will appear in the instrument cluster. At the next vehicle stop (after turning off the Stop/Start system), the engine will not be stopped...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Automatic High Beam Headlamp Control — If Equipped, Flash-To-Pass
- SERVICING AND MAINTENANCE
- Draining Fuel/Water Separator Filter — Diesel Engine
- New on site
- Most important about car
Automatic Headlights — If Equipped, Lights-On Reminder
Automatic Headlights
This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.
