Jeep Wrangler: Using SiriusXM Guardian™ / Remote Door Lock/Unlock
Description
The Remote Door Lock/Unlock feature provides
you the ability to lock or unlock the door on your
vehicle without the keys and from virtually any
distance.
Working Vehicle Conditions
- The vehicle must in PARK or at a standstill.
- The vehicle must be in an open area with cell
tower reception.
- Your mobile device must have a cellular or
Wi-Fi connection.
Requirements
- Vehicle must be properly equipped with the
SiriusXM Guardian™ system.
- Vehicle must have an operable LTE (voice/
data) or 3G or 4G (data) network connection.
If using the Uconnect App to command your
vehicle, your device must be compatible and
be connected to an operable LTE (voice/
data) or 3G or 4G (data) network connectio
- Vehicle must be registered with SiriusXM
Guardian™ and have an active subscription
that includes the applicable feature.
- An ignition cycle is required for some remote
commands, such as Remote Vehicle Start
and Remote Door Lock/Unlock if following a
Remote Horn & Lights activation.
- Your Remote Door Lock/Unlock request will
not be processed if the vehicle is in motion,
the ignition key is on or during an emergency
call.
NOTE:
All other remote services should be performed
via your Owner’s Site or through the Uconnect
App on your compatible device.
Log on to your Owner’s Site using the
username and password you used when
activating your SiriusXM Guardian™
services in your vehicle.NOTE:
If you forgot your username or password, links
are provided on the website to help you retrieve
them...
Description
The Remote Vehicle Start feature provides you
with the ability to start the engine on your
vehicle without the keys and from virtually any
distance...
Other information:
While driving off-road, you will encounter many
types of terrain. These varying types of terrain
bring different types of obstacles. Before
proceeding, review the path ahead to determine
the correct approach and your ability to safely
recover the vehicle if something goes wrong...
Install the front door rail first.
Carefully place the front door rail in the
rubber seal at the top of the windshield, and
line up the holes for the Torx head screws
(two for each door).
Swing the frame bracket around the side of
the rail, and insert the screws from
underneath...