Jeep Wrangler: Radio Mode / Radio Controls

Jeep Wrangler. Radio Controls

Uconnect 3 With 5-inch Display

  1. Preset Radio Stations
  2. All Preset Radio Stations
  3. Radio Band (AM/FM)
  4. Seek Down Jeep Wrangler. Radio Controls
  5. Tune
  6. Station Info
  7. Seek Up Jeep Wrangler. Radio Controls
  8. Audio Settings

Jeep Wrangler. Radio Controls

Uconnect 4 With 7-inch Display

  1. Radio Bands
  2. Preset Radio Stations
  3. View Next Preset Radio Stations
  4. Status Bar
  5. Browse Button
  6. Seek Down Jeep Wrangler. Radio Controls
  7. Tune Button
  8. Seek Up Jeep Wrangler. Radio Controls
  9. Audio Settings
  10. Bottom Bar

The radio is equipped with the following modes:

  • AM
  • FM
  • SiriusXM® Satellite Radio (if equipped)

Press the Radio button on the touchscreen to enter the Radio Mode. The different tuner modes, AM, FM, and SXM, can then be selected by pressing the corresponding buttons in Radio Mode.

Volume & On/Off Control

Push the Volume & On/Off control knob to turn on and off the Uconnect system.

The electronic volume control turns continuously (360 degrees) in either direction, without stopping. Turning the Volume & On/Off control knob clockwise increases the volume, and counterclockwise decreases it.

When the audio system is turned on, the sound will be set at the same volume level as last played.

Mute Button

Push the Mute button to mute or unmute the system.

Tune/Scroll Control

Turn the rotary Tune/Scroll control knob clockwise to increase or counterclockwise to decrease the radio station frequency. Push the Enter/Browse button to choose a selection.

Seek

The Seek Up and Down functions are activated by pressing the double arrow buttons on the touchscreen to the right and left of the radio station display or by pushing the left steering wheel audio control button up or down.

Seek Up Jeep Wrangler. Radio Controls and Seek Down Jeep Wrangler. Radio Controls

Press and release the Seek Up Jeep Wrangler. Radio Controls or Seek Down Jeep Wrangler. Radio Controls button to tune the radio to the next available station or channel. During a Seek Up/Down function, if the radio reaches the starting station after passing through the entire band two times, the radio will stop at the station where it began.

Fast Seek Up Jeep Wrangler. Radio Controls and Fast Seek Down Jeep Wrangler. Radio Controls

Press and hold, and then release the Seek Up Jeep Wrangler. Radio Controls or Seek Down Jeep Wrangler. Radio Controls button to advance the radio through the available stations or channels at a faster rate. The radio stops at the next available station or channel when the button on the touchscreen is released.

NOTE:

Pressing and holding either the Seek Up Jeep Wrangler. Radio Controls or Seek Down Jeep Wrangler. Radio Controls button will scan the different frequency bands at a slower rate.

Info — If Equipped

Press the Info button to display information related to the currently playing song and radio station.

Direct Tune

Press the Tune button located at the bottom of the radio screen to directly tune to a desired radio station or channel.

Press the available number button on the touchscreen to begin selecting a desired station. Once a number has been entered, any numbers that are no longer possible (stations that cannot be reached) will become deactivated/grayed out.

Undo

You can backspace an entry by pressing the Back Jeep Wrangler. Radio Controls utton on the touchscreen.

GO

Once the last digit of a station has been entered, press “GO”. The Direct Tune screen will close, and the system will automatically tune to that station.

Radio Voice Commands

Use your voice to quickly get to the AM, FM, or SiriusXM® Satellite Radio stations you would like to hear. (Subscription or included SiriusXM® Satellite Radio trial required.)

Push the VR button Jeep Wrangler. Radio Controls on the steering wheel and wait for the beep to say a command. See the examples below:

  • “Tune to ninety-five-point-five FM”
  • “Tune to Satellite Channel Hits 1”

Did You Know: At any time, if you are not sure of what to say or want to learn a Voice Command, push the VR button Jeep Wrangler. Radio Controls and say “Help”. The system provides you with a list of commands.

    Radio Mode

    ..

    SiriusXM® Satellite Radio Mode — If Equipped

    Uconnect 3 With 5-inch Display Changing To SiriusXM® Uconnect 4 With 7-inch Display Changing To SiriusXM® SiriusXM® Satellite Radio uses direct satellite-to-receiver broadcasting technology to provide clear, coast-to-coast radio content...

    Other information:

    Jeep Wrangler 2018-2024 Owners Manual: SCHEDULED SERVICING — DIESEL ENGINE


    Your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate...

    Jeep Wrangler 2018-2024 Owners Manual: Instrument Cluster Display Location And Controls


    The instrument cluster display is located in the center of the instrument cluster. Instrument Cluster Display Location The system allows the driver to select information by pushing the following buttons mounted on the steering wheel: Instrument Cluster Display Control Buttons Left Arrow Button Up Arrow Button Right Arrow Button Down Arrow Button OK Button Up And Down Arrow Buttons: Using the up or down arrow button allows you to cycle through the Main Menu Items...

    Categories

    Erasing All The HomeLink® Channels

    To erase the channels, follow this procedure:

    Place the ignition switch into the ON/RUN position. Push and hold the two outside HomeLink® buttons (I and III) for up to 20 seconds, or until the HomeLink® indicator light flashes.

    NOTE:

    Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.

    read more

     
    Copyright © 2024 www.jewrangler.com