Jeep Wrangler: GETTING TO KNOW YOUR INSTRUMENT PANEL / Wrangler Instrument Cluster

GETTING TO KNOW YOUR INSTRUMENT PANEL

..

Instrument Cluster Descriptions

Tachometer Indicates the engine speed in revolutions per minute (RPM x 1000). CAUTION! Do not operate the engine with the tachometer pointer in the red area...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: Auxiliary Switches — If Equipped

Four auxiliary switches located in the lower switch bank of the instrument panel can be used to power various electrical devices. You have the ability to configure the functionality of the auxiliary switches via the Uconnect Settings. All switches can be configured as follows: Switch type operation: Latching or Momentary Power source: Battery or Ignition Ability to hold last state across key cycles: On or Off Auxiliary Switches NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition...

Jeep Wrangler 2018-2026 Owners Manual: Overtaking Traffic

If you pass another vehicle slowly with a relative speed less than 15 mph (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated. If the difference in speed between the two vehicles is greater than 15 mph (24 km/h), the warning light will not illuminate...