Jeep Wrangler: Using SiriusXM Guardian™ / Using A Remote Command Through Your Mobile Device And The Uconnect App
- Press the desired Remote Command icon
on your mobile device.
- A pop-up screen will appear asking for your
SiriusXM Guardian™ Security PIN (this is the
same four-digit code established when you
activated your SiriusXM Guardian™
system). Enter the SiriusXM Guardian™
Security PIN on the keypad.
- It may take 30 seconds or more for the
command to go through to your vehicle.
- A message will let you know if the command
was received by your vehicle.
On the Remote Commands screen, you have
access to several vehicle features that can be
controlled remotely from your mobile device.
These features include locking/unlocking,
remote starting, and activating the horn and
lights of the vehicle...
Log on to your Owner’s Site using the
username and password you used when
activating your SiriusXM Guardian™
services in your vehicle.NOTE:
If you forgot your username or password, links
are provided on the website to help you retrieve
them...
Other information:
Push and hold the programmed
HomeLink® button and observe the
HomeLink® indicator light. If the
HomeLink® indicator light stays on
constantly, programming is complete.
Push the programmed HomeLink® button
to confirm that the garage door opener
motor operates...
Install the front door rail first.
Carefully place the front door rail in the
rubber seal at the top of the windshield, and
line up the holes for the Torx head screws
(two for each door).
Swing the frame bracket around the side of
the rail, and insert the screws from
underneath...