Jeep Wrangler: RECREATIONAL TOWING (BEHIND MOTORHOME) / Towing This Vehicle Behind Another Vehicle


NOTE:
The transfer case must be shifted into (N)
Neutral, automatic transmission must be in
PARK, and manual transmission must be in
gear (NOT in NEUTRAL) for recreational towing...
Other information:
If the door frames are installed from soft top
usage, they must be removed prior to
installation of the hard top. For removal
procedures.
To install the hard top, place the hard top on the
vehicle while making sure that the top is sitting
flush with the body at the sides and check to
ensure that there is a uniform gap between the
lift glass and hard top...
ParkSense can be enabled and disabled with
the ParkSense switch located below the
Uconnect display.
When the ParkSense switch is
pushed
to disable the system, the instrument
cluster display will show
the “PARKSENSE OFF” message for
approximately five seconds...
Categories
To erase the channels, follow this procedure:
Place the ignition switch into the ON/RUN
position.
Push and hold the two outside HomeLink®
buttons (I and III) for up to 20 seconds, or
until the HomeLink® indicator light flashes.
NOTE:
Erasing all channels should only be performed
when programming HomeLink® for the first
time. Do not erase channels when programming
additional buttons.
read more