Jeep Wrangler: Adaptive Cruise Control (ACC) — If Equipped / To Turn Off
The system will turn off and erase the set speed
in memory if:
- The Adaptive Cruise Control (ACC) on/off
button is pushed
- The Fixed Speed Cruise Control on/off button
is pushed
- The ignition is placed in the OFF position
- 4WD Low is engaged
If there is a set speed in the memory, push the
RES button and then remove your foot from the
accelerator pedal. The instrument cluster
display will show the last set speed...
Other information:
Use this QR code to access your digital experience.
Fully lower the soft topCAUTION!
Failure to follow the next steps could result in
damage to the Soft Top or vehicle.
Make sure the lift assist mechanism on
both the left and right sides are in the “lock”
position, and an audible “click” is heard
when pushing down on the #1 bow from
each of the lift assist mechanisms before
removing...
Press and release the MAX A/C
button
on the touchscreen to change the
current setting to the coldest output
of air. The MAX A/C indicator
illuminates when MAX A/C is on. Pressing the
button again will cause the MAX A/C operation
to exit.
NOTE:
The MAX A/C button is only available on the
touchscreen...