Jeep Wrangler 2018-2026 Owners Manual / STARTING AND OPERATING / PARKSENSE REAR PARK ASSIST — IF EQUIPPED / ParkSense Sensors
Jeep Wrangler: PARKSENSE REAR PARK ASSIST — IF EQUIPPED / ParkSense Sensors
The four ParkSense sensors, located in the rear fascia/bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 inches (30 cm) up to 79 inches (200 cm) from the rear fascia/ bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
PARKSENSE REAR PARK ASSIST — IF EQUIPPED
The ParkSense Rear Park Assist system
provides visual and audible indications of the
distance between the rear fascia/bumper and a
detected obstacle when backing up (e...
ParkSense Warning Display
The ParkSense Warning screen is located within
the instrument cluster display. It
provides visual warnings to indicate the
distance between the rear fascia/bumper and
the detected obstacle...
Other information:
Jeep Wrangler 2018-2026 Owners Manual: Preparations For Jump Start
Supplemental Battery — If Equipped WARNING! Only use the positive battery post on the main battery to jump start your vehicle. Serious injury or death could result if you attempt to jump start using the supplemental battery. Battery gas is flammable and explosive...
Jeep Wrangler 2018-2026 Owners Manual: Diesel Exhaust Fluid
Your vehicle is equipped with a Selective Catalytic Reduction (SCR) system to meet the very stringent diesel emissions standards required by the Environmental Protection Agency. The purpose of the SCR system is to reduce levels of NOx (oxides of nitrogen emitted from engines) that are harmful to our health and the environment to a near-zero level...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- 2.0L Engine and 3.6L Engine
- Service 4WD Warning Light — If Equipped
- Auxiliary Switches — If Equipped
- New on site
- Most important about car
Manual Seat Height Adjustment
The driver's seat height can be raised or lowered by using the ratcheting handle, located on the outboard side of the seat. Pull upward on the handle to raise the seat, push downward on the handle to lower the seat. Several strokes may be necessary to achieve the desired position.
Seat Height Adjustment
Copyright © 2026 www.jewrangler.com