Jeep Wrangler: OCCUPANT RESTRAINT SYSTEMS / Occupant Restraint Systems Features
- Seat Belt Systems
- Supplemental Restraint Systems (SRS) Air
Bags
- Child Restraints
Some of the safety features described in this
section may be standard equipment on some
models, or may be optional equipment on
others. If you are not sure, ask an authorized
dealer.
Please pay close attention to the information in
this section. It tells you how to use your restraint
system properly, to keep you and your
passengers as safe as possible...
Other information:
Remove the side grommet (one left and
one right).
Pull the carpet out starting on the top
flange, then all around the perimeter and
open the carpet split around the seat belt
attachment.
Inside Sidewall
Top Flange
Grommet
Side Carpet
When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B-pillar, console, and refasten grommets...
SSC is intended for off-road
driving in
4WD Low only. SSC maintains vehicle
speed by actively controlling engine
torque and brakes.
SSC has three states:
Off (feature is not enabled and will not
activate)
Enabled (feature is enabled and ready but
activation conditions are not met, or driver
is actively overriding with brake or throttle
application)
Active (feature is enabled and actively
controlling vehicle speed)
Enabling SSC
SSC is enabled by pushing the SSC switch, but
the following conditions must also be met to
enable SSC:
The driveline is in 4WD Low...