Jeep Wrangler: Tire Safety Information / Metric Example For Load Limit

For example, if “XXX” amount equals 635 kg and there will be five 68 kg passengers in your vehicle, the amount of available cargo and luggage load capacity is 295 kg (635-340 (5x68) = 295 kg) as shown in step 4.

NOTE:

If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. The following table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle.

For the following example, the combined weight of occupants and cargo should never exceed 865 lb (392 kg).

Jeep Wrangler. Metric Example For Load Limit

WARNING!

Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.

    Loading

    The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire's load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading Information placard...

    Tires — General Information

    ..

    Other information:

    Jeep Wrangler 2018-2025 Owners Manual: Four-Position Transfer Case — If Equipped


    Four-Wheel Drive Gear Selector The transfer case provides four mode positions: 2H (2WD High) — Two-Wheel Drive High Range 4H (4WD High) —Four-Wheel Drive High Range N (Neutral) 4L (4WD Low) — Four-Wheel Drive Low Range For additional information on the appropriate use of each transfer case mode position, see the information below: 2WD High Two-Wheel Drive High Range — This range is for normal street and highway driving on dry, hard surfaced roads...

    Jeep Wrangler 2018-2025 Owners Manual: Enabling And Disabling ParkSense


    ParkSense can be enabled and disabled with the ParkSense switch located below the Uconnect display. When the ParkSense switch is pushed to disable the system, the instrument cluster display will show the “PARKSENSE OFF” message for approximately five seconds...

    Categories

    Bi-Level Mode

    Jeep Wrangler. Bi-Level Mode Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets.

    NOTE:

    Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from the floor outlets.

    read more

     
    Copyright © 2025 www.jewrangler.com