Jeep Wrangler: MIRRORS / Inside Rearview Mirror

MIRRORS

..

Manual Mirror — If Equipped

The rearview mirror can be adjusted up, down, left, and right. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle)...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: Auxiliary Switches — If Equipped


Four auxiliary switches located in the lower switch bank of the instrument panel can be used to power various electrical devices. You have the ability to configure the functionality of the auxiliary switches via the Uconnect Settings. All switches can be configured as follows: Switch type operation: Latching or Momentary Power source: Battery or Ignition Ability to hold last state across key cycles: On or Off Auxiliary Switches NOTE: Holding last state conditions are met when switch type is set to latching and power source is set to ignition...

Jeep Wrangler 2018-2026 Owners Manual: Turning FCW On Or Off


The FCW button is located in the Uconnect display in the control settings. To turn the FCW system on, press the forward collision button once. To turn the FCW system off, press the forward collision button once. NOTE: When the FCW is “on”, this allows the system to warn the driver of a possible collision with the vehicle in front...

Categories

Automatic Headlights — If Equipped, Lights-On Reminder

Automatic Headlights

This system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch clockwise to the last detent for automatic headlight operation. When the system is on, the headlight time delay feature is also on. This means the headlights will stay on for up to 90 seconds after you place the ignition into the OFF position. To turn the automatic system off, move the headlight switch out of the AUTO position.

read more

 
Copyright © 2026 www.jewrangler.com