Jeep Wrangler: STARTING THE ENGINE — GASOLINE ENGINE (IF EQUIPPED) / Extreme Cold Weather (Below –22°F Or −30°C)
To ensure reliable starting at these
temperatures, use of an externally powered
electric engine block heater (available from an
authorized dealer) is recommended.
AutoPark is a supplemental feature to assist in
placing the vehicle in PARK should the
situations on the following pages occur. It is a
back up system and should not be relied upon
as the primary method by which the driver shifts
the vehicle into PARK...
If the engine fails to start after you have
followed the “Normal Starting” or “Extreme Cold
Weather” procedure, it may be flooded. Push
the accelerator pedal all the way to the floor and
hold it there...
Other information:
The engine is equipped with a glow plug
preheating system. If the instructions in this
manual are followed, the engine should start in
all conditions and no type of starting fluid
should be used.
WARNING!
Do not leave children or animals inside
parked vehicles in hot weather...
The fuel/water separator housing is located
inside the left frame rail in front of the fuel tank.
The best access to this water drain valve is from
under the vehicle.
CAUTION!
Do not drain the fuel/water separator filter
when the engine is running...