Jeep Wrangler: DOORS / Automatic Door Locks — If Equipped
The Automatic Door Lock feature default
condition is enabled. When enabled, the door
locks will lock automatically when the vehicle's
speed exceeds 15 mph (24 km/h). The
Automatic Door Lock feature can be enabled or
disabled by an authorized dealer per written
request of the customer. Please see an
authorized dealer for service.
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the swing gate handle, pushing the
Passive Entry lock button will lock the vehicle
doors and the swing gate...
To provide a safer environment for small
children riding in the rear seats, the rear doors
are equipped with a Child-Protection Door Lock
system.
To use the system, open each rear door, use a
flat blade screwdriver (or mechanical key) and
rotate the dial to the lock or unlock position...
Other information:
Unbuckle the combination lap/shoulder belt
and allow it to retract completely to disengage
the Automatic Locking Mode and activate the
vehicle sensitive (emergency) locking mode.
WARNING!
The seat belt assembly must be replaced if
the switchable Automatic Locking Retractor
(ALR) feature or any other seat belt function
is not working properly when checked
according to the procedures in the Service
Manual...
Remove the side grommet (one left and
one right).
Pull the carpet out starting on the top
flange, then all around the perimeter and
open the carpet split around the seat belt
attachment.
Inside Sidewall
Top Flange
Grommet
Side Carpet
When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B-pillar, console, and refasten grommets...