Jeep Wrangler: MIRRORS / Heated Mirrors and Power Mirrors — If Equipped
Heated Mirrors
These mirrors are heated to melt
frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped).
Power Mirrors
Power Mirror Switch
The power mirror controls consist of mirror select buttons and a four-way mirror control switch. To adjust a mirror, push either the L (left) or R (right) button to select the mirror that you want to adjust.
Using the mirror control switch, push any of the four arrows for the direction that you want the mirror to move.
Outside Mirrors
The outside mirror(s) can be adjusted to the
center of the adjacent lane of traffic to achieve
the optimal view.
Outside Rearview Mirror
WARNING!
Vehicles and other objects seen in the
passenger side convex mirror will look smaller
and farther away than they really are...
UNIVERSAL GARAGE DOOR OPENER (HOMELINK®) — IF EQUIPPED
HomeLink® Buttons On Sun Visor
Use this QR code to access your digital experience.
HomeLink® replaces up to
three hand-held transmitters
that operate devices such as
garage door openers, motorized
gates, lighting, or home security
systems...
Other information:
Jeep Wrangler 2018-2026 Owners Manual: Trailer Towing Weights (Maximum Trailer Weight Ratings)
..
Jeep Wrangler 2018-2026 Owners Manual: HAZARD WARNING FLASHERS
The Hazard Warning Flashers switch is located on the instrument panel below the climate controls. Hazard Warning Flashers Switch Push the switch to turn on the Hazard Warning Flashers. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency...
Categories
- Manuals Home
- Jeep Wrangler Owners Manual
- Jeep Wrangler Service Manual
- Automatic High Beam Headlamp Control — If Equipped, Flash-To-Pass
- SERVICING AND MAINTENANCE
- Manual Seat Height Adjustment
- New on site
- Most important about car
Turn Signals. Lane Change Assist — If Equipped
Turn Signals
Move the multifunction lever up or down to activate the turn signals. The arrows on each side of the instrument cluster flash to show proper operation.
NOTE:
If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb.
