Jeep Wrangler 2018-2026 Owners Manual / STARTING AND OPERATING / TRAILER TOWING / Towing Requirements / Towing Requirements — Tires

Jeep Wrangler: Towing Requirements / Towing Requirements — Tires

Proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle.
Check the trailer tires for proper tire inflation pressures before trailer usage.
Check for signs of tire wear or visible tire damage before towing a trailer.
Replacing tires with a higher load carrying capacity will not increase the vehicle's GVWR and GAWR limits.

Towing Requirements

To promote proper break-in of your new vehicle drivetrain components, the following guidelines are recommended: WARNING! Improper towing can lead to a collision...

Towing Requirements — Trailer Brakes

Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer. This could cause inadequate braking and possible personal injury...

Other information:

Jeep Wrangler 2018-2026 Owners Manual: General Information

WARNING! When replacing a blown fuse, always use an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating. Never replace a blown fuse with metal wires or any other material...

Jeep Wrangler 2018-2026 Owners Manual: Engine Check/Malfunction Indicator Warning Light (MIL)

The MIL is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. This warning light will illuminate when the ignition is in the ON/RUN position before engine start. If the bulb does not come on when turning the ignition switch from OFF to ON/RUN, have the condition checked promptly...

Remote Start system

Jeep Wrangler. Remote Start system This system uses the key fob to start the engine conveniently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m).