Jeep Wrangler: Seat Belt Systems / Energy Management Feature
The front outboard seat belt system is equipped
with an Energy Management feature that may
help further reduce the risk of injury in the event
of a collision. The seat belt system has a
retractor assembly that is designed to release
webbing in a controlled manner.
The front outboard seat belt system is equipped
with pretensioning devices that are designed to
remove slack from the seat belt in the event of a collision...
The seat belts in the passenger seating
positions are equipped with a Switchable
Automatic Locking Retractor (ALR) which is
used to secure a child restraint system...
Other information:
The jack and lug wrench are located in the rear
cargo area. To remove jack and tools proceed
as follows:
Lift the load floor in the cargo area.
Load Floor
NOTE:
The load floor can be removed for easier access
by pulling the load floor directly rearward...
The engine block heater warms the engine, and
permits quicker starts in cold weather. Connect
the cord to a standard 110-115 Volt AC
electrical outlet with a grounded, three-wire
extension cord.
Diesel Engine Block Heater Cord Location
The engine block heater cord is found under the
hood bundled up next to the Power Distribution
Center (PDC)...